Neoware T5730 - Compaq Thin Client User Manual page 207

3477_FC
3477_FG
3486_BA
3487_HA
3487_HC
5555_B01
5555_C01
The printer models are listed below:
3812-1
5553-B01
If double byte character sets (e.g. Japanese) are supported and you
wish to use them, then select either
5555_C01
(colour) for display, or
Monochrome
Factory default: Depends on the terminal type
By default the setting of this option will match the normal display
characteristic of the
above. In TeemTalk, all terminal types support both monochrome
and colour display.
When monochrome is selected, characters will be displayed in green
and intense fields will be displayed in white. When monochrome is
not selected, the settings specified in the
used for the display. Refer to the section "Attributes" on page 236
for details.
Rule Line
Factory default: Cross
A rule can be displayed across the emulation workspace at the cursor
position by pressing the keys Alt + Page Down, which toggles it on
and off. The setting of this option determines whether it is displayed
as a horizontal rule, vertical rule, or a cross.
Colour 24 x 80 and 27 x 132
Monochrome 24 x 80 and 27 x 132
Monochrome 24 x 80
Monochrome 24 x 80
Colour 24 x 80
Monochrome 24 x 80
Colour 24 x 80
Single byte printer
Double byte printer
5555_B01
5553-B01
IBM 5250 Model
selected, as shown in the list
Setup Menus
(monochrome) or
for printing.
Attributes
dialog will be
IBM 5250 Settings 185