Tn3270 Options - Neoware c50 - Thin Client User Manual

Getting Started
Send Location
This enables you to enter the location of this terminal which may be used by the host
to provide a list of users currently logged in giving their name and location.

TN3270 Options

This dialog box is displayed by clicking the 3270 Options button in the TCP/IP
Telnet Configuration dialog box when TN3270 is not suppressed.
Connect
This specifies the name of the device which the server will be requested to assign to the
Telnet session; it may be used when requesting either a terminal or a printer session.
You can return the local host name by entering %s after the device name. To return the
user name, enter %u after the device name. You can specify how many characters of
the name is returned in each case. For example, %.3s will return the first three
characters of the local host name, and %-.3s will return the last three characters.
To automatically assign a new device name for each successive connection, either
enter %dN% after the name, where N is a decimal value, or %xN%, where N is a
hexadecimal value. Each time the host requests the device name a counter will be
substituted into the device name. If the host rejects the device name as in use the
counter will be incremented modulus N and the name retried until all possibilities have
been tried, at which point the emulation will report a device name rejected error.
For example, TEST%d4% will give TEST1 on all connections until the host rejects
the name as in use, in which case TEST2 will be used. If this is already in use then
TEST3 is used, or if already in use then TEST0. These values are preserved over
2-11