Punch-In Recording - Yamaha Electone STAGEA ELB-01 Owner's Manual

Punch-in Recording

This lets you re-record over a specific phrase or section—either that of a specific part(s)
or all parts.
1
Insert the media into the USB TO DEVICE terminal.
2
Select the song which contains the phrase you want to change.
For details on selecting a song, see steps 2 and 3 on page 112.
3
Press the [PLAY/PAUSE] button to start playback of the song.
4
Press the [PLAY/PAUSE] button at the point you want to execute
punch-in recording.
The current song is stopped momentarily.
5
Press the [RECORD] button.
The lamp above the [RECORD] button lights, indicating that the M.D.R. is
ready to record.
6
Set the parts which you want to change to "Rec" status and other
parts to "Play."
7
Press the [PLAY/PAUSE] button to start punch-in recording. Play
the new phrase, as you want it to be changed.
8
Press the [STOP] button to quit the punch-in recording as soon
as you reach the end of the phrase.
NOTE
This function is best used
when the phrase to be re-
recorded has definite
beginning and end points,
with slight pauses before
and after.
ELB-01 Owner's Manual 121
6