Yamaha Electone STAGEA ELB-01 Owner's Manual page 162

9
162 ELB-01 Owner's Manual
3
Expression
Determines the control of the expression pedal functions. Ordinarily, this
control is set to Auto. Press the [D] button to make the indicator flash, then
use the DATA CONTROL dial to select the setting.
Auto: Internal and External is automatically switched.
Internal: You can manually control the expression pedal even during
M.D.R. playback.
External: While playing the M.D.R. or receiving MIDI messages, the
expression pedal is invalid. (The volume is controlled by the recorded data in
a USB flash memory or received MIDI data.)
MIDI Out Channel Display
<MIDI OUT CH> UK÷ 1›
LK¿ 2
2
For setting the channels over which MIDI information will be transmitted. Any
channel from 1 through 16 can be assigned to each keyboard, the Upper
Keyboard, the Lower Keyboard and the Pedalboard. The MIDI messages on
each keyboard will be sent on the channels set here. You must set the transmit
channel here to match the receive channel of the connected device.
1
Upper Keyboard
You can select the channel for the Upper Keyboard.
Press the [B] button to make the indicator flash, then use the DATA
CONTROL dial to select the setting.
2
Lower Keyboard
You can select the channel for the Lower Keyboard.
Press the [C] button to make the indicator flash, then use the DATA
CONTROL dial to select the setting.
3
Pedalboard
You can select the channel for the Pedalboard.
Press the [D] button to make the indicator flash, then use the DATA
CONTROL dial to select the setting.
MIDI Out Filter Display
<MIDI OUT FILTER>
'RHYTHM
Deletes unnecessary MIDI data and keeps it from being transmitted from the
Electone. Rhythm start/stop messages can be filtered on the Electone.
Successive presses [C] button alternates between being transmitted (Off ) and
not transmitted (On).
1
PK÷ 3
3
fi