Re-Recording (Retry); Recording Each Part Separately - Yamaha Electone STAGEA ELB-01 Owner's Manual

CAUTION
Do not remove the media
from the instrument during
recording (while the
message is shown).
6
118 ELB-01 Owner's Manual
6
When you finish playing, press the [STOP] button.
Recording stops and your performance is written to the song.
The song to which your performance is recorded is automatically named
"SONG xx" (xx indicates the number). You can change the song name as
desired. (For details, see page 122.)
7
To hear your newly recorded performance, press the [PLAY/
PAUSE] button.
Playback will begin after a couple of seconds, as the Electone reads the
Registration. For more information on playback and other playback-related
functions, see page 132.

Re-recording (Retry)

If you make a mistake during recording, you can re-record the song from the
beginning.
1
Press the [PLAY/PAUSE] button while the song is still running.
This automatically stops recording and returns you to the starting point of the
song. The lamp above the [PLAY/PAUSE] button starts flashing, indicating that
you can re-record the song.
2
Press the [PLAY/PAUSE] button again.
Re-recording starts from the beginning of the song and replaces the previously
recorded performance with the newly recorded performance.

Recording Each Part Separately

You can also record the parts of your performance independently. This function lets
you record Keyboard Percussion and performance control data, such as Registration
changes and expression pedal operation, separately from the other parts of the song.
Even Keyboard Percussion and Lead Voice can be recorded separately. The following
instruction is an example: First, record the chords and bass to the song using the Lower
and Pedalboard, and then record the melody using the Upper Keyboard.
1
Follow steps 1 through 3 on page 117 to call up the Rec Standby
display.