Converting To Xg Format - Yamaha Electone STAGEA ELB-01 Owner's Manual

6
144 ELB-01 Owner's Manual

Converting to XG format

This function allows you to convert ELB-01 song data to XG format data. You can play
back the data using XG devices. The converted XG song data may not sound the same
as the original data.
Make sure to check the remaining memory of the destination media in advance. If
memory space is insufficient, the Convert operation is not available. Protected songs
cannot be converted to XG format.
1
Select the song to be converted to the XG format.
See steps 2 and 3 on page 112 for instructions on selecting songs.
2
Use the PAGE buttons to select the Convert display (Page 7).
<CONV>¿EL
3
Select the conversion format.
Select "XG" by using the DATA CONTROL dial or successively pressing the
[A] button.
4
Press the [B] button corresponding to [EXE] (Execute) in the
display.
The Convert Destination display appears.
5
Select the blank song as destination.
6
Press the [D] button corresponding to [EXE] (Execute) in the
display.
7
A message will appear, prompting confirmation of the converted
data. Press the [C] button to play back the data.
≤Check the data.
≤[OK]
After playback is finished, the LCD return to the Convert display. The song
converted to XG format is automatically named "XGSONGxxx" (xxx indicates
the number). For instructions on changing the song name, see page 122.
[EXE] ‡
001:SONG 1
[Cancel]≤
´
≤