Formatting External Media - Yamaha Electone STAGEA ELB-01 Owner's Manual

2

Formatting External Media

If you find that you are unable to use new, blank USB flash memory/floppy disks or old
ones that have been used with other devices, you may need to format them. Formatting
erases all the data in the media and makes it ready to record. The data erased by
formatting will be lost permanently. Check whether or not the media contains any
important data you wish to keep before executing the operation
1
Insert the media into the USB TO DEVICE terminal.
2
Press the [MDR] button on the panel to call up the M.D.R. display.
<SONG SELECT>
¿Ã001:USB 01
3
Select the desired media you want to format.
<SONG SELECT>
¿Ã001:USB 01
To format a USB flash memory device, select "USB xx" (xx indicates the number
of the device). If you insert two media/devices, the media inserted first will be
shown as "USB 01" and the latter one will be shown as "USB 02."
Select the desired media by turning the DATA CONTROL dial or by successive
pressing of the [C] button when the desired media is not displayed
⁄
[Õ]
⁄
[Õ]
NOTE
By installing the optional
UD-FD01 floppy disk drive
to the ELB-01, you can
format floppy disks. Floppy
disks will be shown in the
display as "USB-FDxx" (xx
indicates the number of the
disk).
ELB-01 Owner's Manual 109
6