Voice Display - Yamaha Electone STAGEA ELB-01 Owner's Manual

2

Voice Display

The Voice Display allows you to easily check which Voices are being used for each
keyboard. It also allows you to set whether the Voice for each section sounds or not by
changing the On/Off status in the display.
How to call up the Voice Display:
Pressing the [VOICE DISPLAY] button in the Display Select section selects the Voice
Display. (The Voice Display always appears when the Electone is turned on.)
¨"Strings1Î"Violin3
Ò"Piano1
Each of the keyboards and Pedalboard have two basic Voice sections: Voice section 1
and Voice section 2. To select a Voice, you need to first select the desired Voice section.
For this reason, the Voice Display actually has two separate displays: one for checking
the Voice selected in Voice section 1, and the other for Voice section 2. To switch
between the Voice sections, press the [VOICE SECTION] button at the top left on the
panel.
Successive presses of the [VOICE SECTION] button at the top left on the panel
alternate between the two displays.
∏"FingrBs1
Selected Voice section number's lamp is lit
Reference Page
On/Off status of Voices
(page 28)
Reference Page
Voices for each keyboard
(page 21)
Reference Page
Switching between Voice
section 1 and Voice section
2 (page 29)
ELB-01 Owner's Manual
2
23