Playing Back Xg Songs - Yamaha Electone STAGEA ELB-01 Owner's Manual

Reference Page
Converting to XG format
(page 144)
6
136 ELB-01 Owner's Manual

Playing Back XG Songs

The Electone allows you to playback XG song data, created on the computer or
converted from Electone song format to XG format. Naturally, you can use the fast
forward, rewind and pause controls, just as with songs (performances) recorded on the
Electone.
1
Insert the media containing the XG song data, then press the
[MDR] button.
2
Select the media that contains the desired XG song in the Song
Select display, and then select the desired song for playback.
See steps 2 and 3 on page 112 for instructions on selecting songs.
3
Use the PAGE buttons to select Page 3.
You can set the volume or mute settings for each part.
1
<PART>¿ALL
VOL.¿100
3
1
Part
Select the desired channel "CH1" through "CH16" or "ALL" to specify the part
to mute/play or to change the volume.
Press the [A] button to make the "¿" indicator flash, then use the DATA
CONTROL dial to select the setting.
2
Playback/Off
Sets the selected part for playback or mute (off ). Select "Play" for the part you
want to play back and select "Off " for the part you want to mute. Press the [B]
button to make the "÷" indicator flash, then use the DATA CONTROL dial to
select the setting.
3
Volume
You can adjust the volume for the selected part within a range of 0 – 100.
Press the [C] button to make the "¿" indicator flash, then use the DATA
CONTROL dial to select the setting.
The item "Volume" will be changed to "XG Volume" when the selected song
contains an XG part, even when the song has been created on the ELB-01 or
EL-900. You can adjust the XG part volume from Page 3, in the same way as you
did with the XG songs.
ALL
CH1
CH2
CH16
÷PLAY‹
2