Recording The Sounds Of The Electone To An External Recorder; Controlling External Midi Devices From The Electone - Yamaha Electone STAGEA ELB-01 Owner's Manual

Reference Page
What is MIDI (page 157)
NOTE
When you are using the
M.D.R., MIDI data cannot be
9
transmitted.
154 ELB-01 Owner's Manual
Recording the Sounds of the Electone to an External
Recorder
You can record your Electone performance to an external recorder, such as an MD
recorder or cassette tape recorder, using the AUX OUT jacks.
Cassette tape recorder, etc.
LINE IN L R
Audio cable

Controlling External MIDI Devices from the Electone

You can use the Electone to remotely play the Voices of a MIDI keyboard (or tone
generator), combining them with the Electone and letting you create even richer, more
multi-layered sound textures. (The MIDI receive channels of the MIDI keyboard must
match the transmit channels on your Electone.)
The Electone transmits a variety of performance messages along with note information
as digital data, including values that indicate how far the expression pedal is pressed
down and how hard you play the keyboard. How the connected external device
responds to these messages depends on the particular device.
MIDI terminals are automatically disabled when the USB TO HOST terminal is used.
AUX OUT L R
Recording
MIDI OUT
MIDI cable
MIDI messages
Tone generator
MIDI IN