Using The Lcd Display; Lcd Display And Lcd Buttons - Yamaha Electone STAGEA ELB-01 Owner's Manual

3

Using the LCD display

Many of the Electone's operations are done from the LCD display. Pressing a button on
the panel automatically calls up the relevant function for the corresponding button in
the display. Depending on the display that appears, you can conveniently perform
various functions and change values/settings by using the [A] – [D] buttons (located at
either side of the LCD) and the DATA CONTROL dial (at the right of the LCD).

LCD Display and LCD Buttons

The functions of the [A] – [D] buttons differ depending on the selected display. Keep
in mind that three types of indicators are used with the functions and parameters: a
flashing indicator (¿ or ÷) a continuously lit indicator (¿ or ÷) and a square on/off
indicator (" or ').
Ò<FOOT.SW>
MODE¿GLIDE
2
1
Flashing indicator (¿ or ÷)
When the indicator at an item is flashing, you can directly select the item or parameter
(in this case, "Time") by turning the DATA CONTROL dial clockwise. (When the
final item is reached, turning the DATA CONTROL dial clockwise does not "wrap
around" to the first item.) Turning the DATA CONTROL dial counter-clockwise
selects in the reverse order. (Similarly, when the first item is reached, turning the DATA
CONTROL dial clockwise does not "wrap around" to the last item.) Also, you can
change the desired value/setting by successively pressing the corresponding [A] –[D]
button (in this case, the [B] button). The value or setting changes (in steps) each time
the button is pressed.
2
Continuously lit indicator (¿ or ÷)
This indicates that the corresponding item/parameter is not currently selected for
change. When the ¿/÷ indicator at an item is continuously lit, pressing the
corresponding [A] – [D] button (in this case, the [C] button, corresponding to the
Mode setting) switches to a flashing indicator, letting you change value/setting with the
DATA CONTROL dial. Also, you can change the desired value/setting by successively
pressing the corresponding [A] – [D] button (in this case, the [C] button).
3
On/off indicator (" or ')
A solid square (") next to an item indicates that the corresponding function (in this
case, "Lead") is on.
A hollow square (') indicates that the function is off. Pressing the [A] – [D] button
corresponding to the desired item or parameter (in this case, the [D] button) alternates
between On and Off.
1
TIME÷1 ⁄
"LEAD
3
ELB-01 Owner's Manual
1
17