Midi Control - Yamaha Electone STAGEA ELB-01 Owner's Manual

5

MIDI Control

When you connect your Electone with a second MIDI device (such as a synthesizer or
computer), you can determine how the Electone controls that MIDI device, or how the
Electone is controlled.
To select the MIDI page:
1
Press the [UTILITY] button.
The Utility display appears. The MIDI Pages are found on Pages 3 – 5.
<æy∫/LANGUAGE>
'i-y∫
2
Use the PAGE buttons to select Pages 3 – 5.
Internal/External Display
<INT/EXT> LEAD÷INT.‹
SYNC¿INT. EXP.÷AUTO
Internal/External
Switches control over the displayed items between the Electone (Internal) or the
connected device (External).
1
Lead
Determines Internal or External control of the Lead Voice.
Press the [B] button to make the indicator flash, then use the DATA
CONTROL dial to select the setting.
Internal: The Lead Voice is played from the Upper Keyboard of the
Electone. (If the To Lower function is on, it is played from Lower Keyboard.)
External: The Lead Voice is played from the connected instrument via
MIDI channel 4.
2
Synchro
Determines the source of the timing control, for rhythm synchronization
purposes.
Press the [C] button to make the indicator flash, then use the DATA
CONTROL dial to select the setting.
Internal: Pressing the Rhythm [START] or [SYNCHRO START] button
on the panel controls and synchronizes to any connected devices (e.g.,
sequencer, etc.).
External: Starting the rhythm of a connected rhythm machine also starts
the rhythm of the Electone.
"ENGLISH
1
2 3
⁄
ELB-01 Owner's Manual 161
9