Adjusting The Voice Volume - Yamaha Electone STAGEA ELB-01 Owner's Manual

2
26 ELB-01 Owner's Manual
The Voice menu contains many Organ Voices, and only the currently selected
Organ Voice appears in the display.
3
Select the Voice in the Voice Menu display.
You can select other "hidden" Organ Voices in sequence by turning the DATA
CONTROL dial clockwise. Turning the DATA CONTROL dial counter-
clockwise selects in the reverse order.
<ORGAN>
¿03:Pipe Organ 3
Here we've selected Pipe Organ 3 for Upper Keyboard Voice 1.
You can also select other Voices in the Voice Menu display by pressing the [C]
button (once or repeatedly). Each press of the [C] button selects another hidden
Voice. If you press the [C] button when the last voice is shown, selection "wraps
around" back to the first voice.
Now go on to select voices for the Lower keyboard and Pedalboard as you did for the
Upper keyboard above.

Adjusting the Voice volume

There are two ways to set the Voice volume: using the Volume buttons on the panel
and setting the volume in the display. The Volume buttons let you make coarse
adjustments to the volume while the setting in the display gives you fine control.
Using the VOLUME buttons on the panel (coarse)
Press one of the Volume buttons of each Voice section on the panel to set the desired
level for each Voice. The controls have seven volume settings, from a minimum of 0, or
no sound, to a maximum of full volume.
¨1
Increasing the volume
Decreasing the volume