Transpose And Pitch Controls - Yamaha Electone STAGEA ELB-01 Owner's Manual

8

Transpose and Pitch Controls

There are two pitch-related controls on the Electone: Transpose and Pitch.
Transpose allows you to change the key of the instrument and Pitch lets you finely adjust the
tuning. Transpose and Pitch can be adjusted in the Utility display.
8
NOTE
The Transpose setting here
is not applicable for XG
songs (page 136).
150 ELB-01 Owner's Manual
1
Press the [UTILITY] button.
<æy∫/LANGUAGE>
'i-y∫
The Utility display appears.
2
Select Page 2 of the Utility display by pressing the PAGE buttons.
<æy∫/LANGUAGE>
'i-y∫
<TRANSPOSE> <PITCH>¤
¿ 0
1
In this page, you can change the Transpose and Pitch settings by using the [C]
[D] buttons and the DATA CONTROL Dial.
1
Transpose
Determines the coarse pitch setting of all the Voices, and is adjustable in half
steps (semitones). Press the [C] button to make the "¿" indicator flash, then use
the DATA CONTROL Dial to change the setting
Range: -6 – +6
2
Pitch
Determines the fine pitch setting of all the Voices. Each step changes the pitch
by 0.2 Hz. The default Pitch setting is 440.0 Hz (corresponding to key A3).
Press the [D] button to make the "÷" indicator flash, then use the DATA
CONTROL Dial to change the setting
Range: 427.2 Hz – 452.6 Hz
You can also change the Transpose and Pitch for each Voice section, in the Voice
Condition display. (See page 43 for details.)
Currently selected page
"ENGLISH
⁄
"ENGLISH
÷440.0Hz
2
⁄