Yamaha Electone STAGEA ELB-01 Owner's Manual page 2

Hide thumbs Also See for Electone STAGEA ELB-01:
Table of Contents

Advertisement

PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited
to, the following:
Power supply/Power cord
• Only use the voltage specified as correct for the instrument. The required
voltage is printed on the name plate of the instrument.
• Check the electric plug periodically and remove any dirt or dust which may
have accumulated on it.
• Do not place the power cord near heat sources such as heaters or radiators,
and do not excessively bend or otherwise damage the cord, place heavy
objects on it, or place it in a position where anyone could walk on, trip over,
or roll anything over it.
Do not open
• Do not open the instrument or attempt to disassemble the internal parts or
modify them in any way. The instrument contains no user-serviceable
parts. If it should appear to be malfunctioning, discontinue use
immediately and have it inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or
damage to the instrument or other property. These precautions include, but are not limited to, the following:
Power supply/Power cord
• When removing the electric plug from the instrument or an outlet, always
hold the plug itself and not the cord. Pulling by the cord can damage it.
• Remove the electric plug from the outlet when the instrument is not to be
used for extended periods of time, or during electrical storms.
• Do not connect the instrument to an electrical outlet using a multiple-
connector. Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.
Assembly
• Read carefully the attached documentation explaining the assembly
process. Failure to assemble the instrument in the proper sequence might
result in damage to the instrument or even injury.
2
ELB-01 Owner's Manual
PRECAUTIONS
• Do not expose the instrument to rain, use it near water or in damp or wet
• Never insert or remove an electric plug with wet hands.
• Do not put burning items, such as candles, on the unit.
• If the power cord or plug becomes frayed or damaged, or if there is a
• Do not expose the instrument to excessive dust or vibrations, or extreme
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment,
• Do not place the instrument in an unstable position where it might
• Before moving the instrument, remove all connected cables.
• When setting up the instrument, make sure that the AC outlet you are using
• Do not place the instrument against a wall (allow at least 3 cm/one-inch
1/2
(1)B-9
Water warning
conditions, or place containers on it containing liquids which might spill
into any openings.
Fire warning
A burning item may fall over and cause a fire.
If you notice any abnormality
sudden loss of sound during use of the instrument, or if any unusual
smells or smoke should appear to be caused by it, immediately turn off the
power switch, disconnect the electric plug from the outlet, and have the
instrument inspected by qualified Yamaha service personnel.
Location
cold or heat (such as in direct sunlight, near a heater, or in a car during the
day) to prevent the possibility of panel disfiguration or damage to the
internal components.
mobile phone, or other electric devices. Otherwise, the instrument, TV, or
radio may generate noise.
accidentally fall over.
is easily accessible. If some trouble or malfunction occurs, immediately
turn off the power switch and disconnect the plug from the outlet.
from the wall), since this can cause inadequate air circulation, and possibly
result in the instrument overheating.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents