Replacing Registrations - Yamaha Electone STAGEA ELB-01 Owner's Manual

If you select a numbered bank, such as "01" instead of "_ _", this procedure will
overwrite the numbered bank. For details, see step 6 of "Replacing Registrations" on
page 128.
6
Press the [B] button corresponding to [EXE] (Execute) in the
display.
The Registration bank will be added and follows previously contained banks.
When you play back this song, the top Registration in this display will be loaded
to the Electone.

Replacing Registrations

The M.D.R. also lets you change the Registrations of an existing song without
changing the performance data.
1
First make all the desired settings you want to save to the new
Registration.
2
Insert the media into the USB TO DEVICE terminal.
3
Press the [MDR] button, and then select the desired song
containing the Registration you wish to replace.
For details on selecting a song, see steps 2 and 3 on page 112.
4
Use the PAGE buttons to select Page 9.
The Registration bank number will be shown at the bottom right of the display.
<REG.SAVE>
5
Select the Registration bank number you wish to overwrite by
using the DATA CONTROL dial.
[EXE] ·
001:SONG 1 ¸÷01
Registration
Reference Page
Files (page 116)
Reference Page
Song Icons (page 116)
ELB-01 Owner's Manual 127
6