Yamaha Electone STAGEA ELB-01 Owner's Manual page 103

¸<REG.SHIFT>
MODE¿OFF
1
OFF
2
SHIFT
3
JUMP
4
USER
1
Off
Turns off the Registration Shift assignment. When Off is selected, Registrations
cannot be changed by using the Right Footswitch.
¸<REG.SHIFT>
MODE¿OFF
2
Shift
In the Shift mode, each press of the Right Footswitch selects the Registration
Memory presets in their numerical order. After the last Registration is reached,
the function 'wraps around' to select the first preset again. The LEDs of
numbered buttons ([1] – [8]) light up as they are selected. Keep in mind that the
numbered buttons' LEDs do not light up if Registrations 9 – 16 are selected.
¸<REG.SHIFT>
MODE¿SHIFT
3
Jump
Pressing the Right Footswitch jumps to select the designated panel Registration.
Press the [D] button to make the "÷" indicator flash, then select the Jump
"destination" with the DATA CONTROL dial or [D] button.
¸<REG.SHIFT>
MODE¿JUMP
4
User
In the User mode, each press of the Right Footswitch selects Registrations
according to the order you've specified. You can also specify an end point for the
Registration Shift function. User Shift can be set in Page 2, and Shift End can be
set in Page 1 of the Registration Shift display.
¸<REG.SHIFT>
MODE¿USER
1˘ 2
Next Registration
REGIST÷ 1
Registration number of the destination
⁄
END÷STOP
ELB-01 Owner's Manual 103
5