Recording - Yamaha Electone STAGEA ELB-01 Owner's Manual

Files in the song
File
Performance This file contains performance data, played on the
data keyboards and pedals of the Electone.
Registration This file contains Registration settings, User Voices, User
data rhythms, and Rhythm Sequences.
XG-converted This file contains XG song data, for which Electone
data performance data is converted to XG-compatible format.
4

Recording

Recording
Before recording, set up the Electone just as you'll need it for the entire recording. Set
the desired Registrations you'll use throughout the performance/recording in
Registration Memory and make sure also to select the Registration that you will use at
the beginning of the song
1
Insert the media into the USB TO DEVICE terminal.
2
Select the blank song (new song) for recording your
performance.
For details on selecting a song, see steps 2 and 3 on page 112.
ÃUSB 01
¿ ___:new song
3
Press the [RECORD] button.
The lamp above the [RECORD] button lights, indicating that the Electone is
ready to record.
You can cancel the operation at this point by pressing the [STOP] button.
4
Press the [PLAY/PAUSE] button.
The lamp above the [PLAY/PAUSE] button lights up and a small arrow
indicator flashes across from left to right at the top right of the LCD display.
This indicates that the M.D.R. is reading the registrations.
5
After "REC~~" appears at the top right of the LCD display, begin
playing.
Explanation
[˜] ⁄
Extension
.mid
.b00
.mid
NOTE
When you record the song
using the Next Regist
function, make sure to press
the [PLAY/PAUSE] button
before pressing the
[RECORD] button. For
details, see page 129.
ELB-01 Owner's Manual
6
117