Yamaha Electone STAGEA ELB-01 Owner's Manual page 165

5-2
Use the four long screws to fasten the Main unit to
the Sideboards as shown in the illustration.
Long screw
6
Fit the Grill Net onto the Speaker.
First, align the net with the bottom line, then
secure it to the speaker assembly.
Long screw
Fasten the Grill Net by
inserting the knobs
into the holes.
7
Connect the Pedalboard cord and Speaker
cord to the Main Unit.
Make sure that the latches on each plug of the
cords face toward you, and connect them to each
socket securely.
Speaker cord
8
Fix the Pedalboard cord to the Sideboard
using the Pedalboard cord clamps.
8-1
Affix the two Pedalboard cord clamps to the rear
side of the Speaker unit and the lower inside of the
Left Sideboard as shown in the illustration.
8-2
Insert the Pedalboard cord in the clamps.
Shut the clamp
after inserting
the cord.
Pedalboard cord
ELB-01 Owner's Manual
10
165