Selecting From The Panel; Reverb - Yamaha Electone STAGEA ELB-01 Owner's Manual

3
Reference Pages
Changing the rhythm
volume/reverb (page 62)
Reverb (page 42)
48 ELB-01 Owner's Manual
2

Selecting from the panel

The Reverb, Sustain and Rotary Speaker displays are called up by pressing the
respective buttons on the panel.

Reverb

Reverb adds an echo-like effect to the sound, giving the impression of a performance in
a large room or concert hall. You can adjust the reverb volume for each Voice section or
the entire system. Also, you can adjust the reverb volume for rhythm and
accompaniment separately.
Call up the Reverb display to set the Reverb effect by pressing the [REVERB] button
on the panel.
Each press of the [REVERB] button toggles between On and Off. When set to On, the
lamp of the button lights up to indicate that Reverb is on.
Reverb Display
<REVERB>
¿XG HALL 1
1
1
Type
Selects the Reverb Type.
Press the [C] button to make the "¿" indicator flash, then use the DATA CONTROL
dial to change the setting.
2
Depth
Determines the depth of reverberation or the level of the reflected sounds. This allows
fine control over the depth. When this parameter is set to the minimum, the settings in
Voice Condition display, Page 2 (page 43) have no effect.
Press the [B] button to make the "÷" indicator flash, then use the DATA CONTROL
dial to change the setting.
Range: 0 - 24
3
Time
Determines the reverb length for each of the Voice sections.
Higher settings result in a longer reverb sound.
Press the [D] button to make the "÷" indicator flash, then use the DATA CONTROL
dial to change the setting.
Range: 0.3s – 30.0s
2
DEPTH÷ 0
TIM÷ 2.1
3