Selecting A Voice For Voice Section 2; Switching Between Voice Section 1 And Voice Section 2 - Yamaha Electone STAGEA ELB-01 Owner's Manual

3

Selecting a Voice for Voice section 2

This feature lets you blend two Voices together—Voice section 1 with a different Voice
in Voice section 2. This is useful for creating rich textures in the sound, playing the two
Voices in a layer. For details on how to select a Voice for Voice section 1, see page 25.
The instructions below explain how to selecting a Voice (Upper Keyboard Voice 2) for
Voice section 2.

Switching between Voice section 1 and Voice section 2

To switch between Voice section 1 and Voice section 2, press the [VOICE SECTION]
button on the panel.
For the Voice section which is indicated as "xxx Voice 1/2" (Voice section name is
written in xxx) on the panel, you can select the Voice from each section by switching
between sections 1 and 2 by pressing the [VOICE SECTION] button.
[VOICE SECTION] button
Each press of the [VOICE SECTION] button alternates between the available Voice
sections 1 and 2. The lamp of the selected (available) Voice section number lights up.
When Voice section [1] is lit
Since the Voice section 1 is selected,
you can select the Upper Keyboard
Voice 1, Lower Keyboard Voice 1 and
Pedal Voice 1.
Upper Keyboard Voice 1 Lead Voice
Pedal Voice 1
Lower Keyboard Voice 1
When Voice section [2] is lit
Since the Voice section 2 is selected,
you can select the Upper Keyboard
Voice 2, Lower Keyboard Voice 2 and
Pedal Voice 2.
Upper Keyboard Voice 2 Lead Voice
Lower Keyboard Voice 2 Pedal Voice 2
NOTE
Switching between Voice
sections 1 and 2 has no
effect on which Voice is
sounded by the keyboard.
ELB-01 Owner's Manual
2
29