Yamaha Electone STAGEA ELB-01 Owner's Manual page 130

6
NOTE
While a rhythm is playing,
sequence data and User
rhythm in the Registration
data created on the
Electone such as ELS-01/
01C/01X cannot be loaded.
130 ELB-01 Owner's Manual
5
Repeat steps 2 through 4 above to save the Registration banks in
the order you want to recall them in the same song. When making
new Registration Shift setting, delete the previous settings, then
continue.
For details, see "Saving Two or More Registration Banks to One Song" on
page 126.
Once the Next Regist function has been turned on and set, you can use the function,
following the steps below.
6
Press the [MDR] button, and select the song for which the Next
Regist function has been set.
See steps 2 and 3 on page 112 for instructions on selecting Songs.
7
Press the [PLAY/PAUSE] button.
If the song contains more than two Registration banks, the first one (¸:01) will
be loaded. You can check the Registration order in Page 2 of the Registration
Shift display.
8
As you play the Electone, press the Right Footswitch.
Each press of the Right Footswitch selects Registrations according to the order
you've specified.
After finishing the play back of the "¸:01," the next Registration bank "¸:02"
begins loading automatically, and can be selected by pressing the Right
Footswitch.
When you record or play the song using the Next Regist function, make sure to load
the top Registration bank (R:01) to the Electone by pressing the [PLAY/PAUSE]
button after selecting the desired song. If you begin the recording procedure instead
by pressing the [RECORD] button, even as another bank (R:02, etc.) is loading,
R:01 is overwritten by the current panel settings and will be lost.
Right Footswitch
Expression Pedal