Level 2 Certificate Configuration Commands - Watchguard V10 Command Line Interface Manual

• "Level 2 High Availability configuration commands"
on page 72
• "Level 2 IKE configuration commands" on page 78
• "Level 2 interface configuration commands" on
page 82
• "Level 2 IPSec configuration commands" on page 95
• "Level 2 license commands (for upgraded or additional
features)" on page 117
• "Level 2 Quality of Service (QoS) configuration
commands" on page 100
• "Level 2 Remote Access Service (RAS) configuration
commands" on page 102
• "Level 2 System Configuration commands" on
page 107
• "Level 2 tenant configuration commands" on page 119

Level 2 certificate configuration commands

request command (configure certificate level)
WG#config<ENTER>
WG(config)#certificate <ENTER>
WG(config-cert)#request <"name"> -company
<"name"> \
[-country<"name">] [-department <"name">]
-dns_name \
<"name"> [-ip_address <a.b.c.d>] [-
user_domain \
<admin@domain.com>] [-key_usage {<rsa|dsa>
\
<1024|512> <encryption|signature|both>}]
Effect
WatchGuard Command Line Interface Guide
Second level configuration mode commands
Generates a VPN certificate request that can be sent
to a certifying authority. After executing this
command (with the required arguments), you must
cut the resulting certificate text and paste it into the
relevant form: an e-mail message, a Web-site
67