Watchguard V10 Command Line Interface Manual page 150

CHAPTER 4: Debug Mode Commands
Arguments
136
Pay special attention to the arguments for this
command.
[-pap <password>]
This optional argument specifies PAP as the
authentication used by this RADIUS server, along
with the PAP password.
[-sid <passcode>]
This optional argument specifies SecurID as the
authentication used by this RADIUS server, along
with the SecurID passcode.
[-p <value>]
This argument allows you to record a specific port
number for the RADIUS server. The default port
number is "1812" and you can ignore this
argument if the port number was not changed.
[-r <value>]
This argument specifies the maximum number of
tries (between 1 and 10) made by this command.
The default is "3".
[-s <value>]
This argument records the "secret" login password
required by the RADIUS server. The default is
"test123".
[-t <value>]
This argument establishes the timeout value for
each test message.
The default value is "2".
[-u <value>]
This argument records a RADIUS user name for
WatchGuard Vclass 5.1