Export Command - Watchguard V10 Command Line Interface Manual

CHAPTER 2: Administration Mode Commands
Effect
Arguments
Example
If you apply this command, certain WatchGuard features
incorporated in the current version may not be available
afterwards. This will affect both configurations and policies
in this appliance. You should make a careful review of this
security appliance's setup to prevent any problems.

export command

WG#admin<ENTER>
WG(admin)#export
Effect
cert_request to export certificate requests
log to export the log archive
xml to export an XML profile
ip to export the blocked or exception IP lists
Each export option requires specific syntax.
export cert_request:
export cert_request <CERT_ID> [-tftp] <host:/target/
file_name>
target/file_name>
30
Restores the system software to the previously
installed version.
None
WG(admin)#downgrade<ENTER>
N
Exports certificate requests, the log archive, or an
XML profile. The export command must be
followed by a space and the name of the item to be
exported:
-ftp <[user[:passwd]@]host:/
-[console]
OTE
WatchGuard Vclass 5.1