Level 2 License Commands (For Upgraded Or Additional Features) - Watchguard V10 Command Line Interface Manual

vpn command (configure system level)
WG#config<ENTER>
WG(config)#system <ENTER>
WG(config-system)#vpn [[no]
ignore_DF_for_IPSec] [[no]
IPSec_pass_through]
Effect
Arguments
Level 2 license commands (for upgraded or
additional features)
Import command (config license level)
WG#config<ENTER>
WG(config)#license <ENTER>
WG(config-license)#import
Effect
Arguments
active_feature command (config license level)
WG#config<ENTER>
WG(config)#license
WG(config-license)#active_feature <ENTER>
WatchGuard Command Line Interface Guide
Second level configuration mode commands
This allows you to set options for VPN.
[no] ignore_DF_for_IPSec
This enables fragments of large packets through
the VPN tunnel. If you set this feature, the
appliance ignores the don't fragment (DF) rule.
[no] IPSec_pass_through
This allows IPSec pass-through.
Imports a new license that upgrades or adds
functionality to the appliance.
None
117