Page 2
This device must accept any interference received, including interference that may cause undesired operation. CE Notice The CE symbol on your WatchGuard Technologies equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU).
Page 3
VCCI Notice Class A ITE Firebox V10, V60L, V60, V80, V100 Hardware Guide...
Page 5
EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS SHALL BE TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL WATCHGUARD TECHNOLOGIES BE LIABLE TO Firebox V10, V60L, V60, V80, V100 Hardware Guide...
Page 7
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a Firebox V10, V60L, V60, V80, V100 Hardware Guide...
Page 8
textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
WatchGuard Firebox V100 security appliance Front and Back Views The Firebox V10 model The Firebox V60, V60L and V80 models The Firebox V100 model Firebox V10, V60, V60L, V80, and V100 Components Index ... 13 Firebox V10, V60L, V60, V80, V100 Hardware Guide ...1 ...
This chapter provides a visual tour of the external hardware features of the WatchGuard® Firebox® V10, V60, V80, and V100 security appliances, focusing on the buttons, LEDs, interfaces, ports. Please see the Fire- box Vclass User Guide for installation instructions.
• Rack-mounting hardware. If you are mounting the appliance in a rack, note that Firebox V60L, V60, and V80 appliances are 1U high. WatchGuard Firebox V100 security appliance • One power cord • One red, crossover, 10/100 BaseT, Ethernet cable •...
Linux. The CD also provides electronic versions of the complete user documentation set. • Rack-mounting hardware. If you are mounting the appliance in a rack, note that the Firebox V100 is 1 U high. Front and Back Views The Firebox V10 model The front panel of a Firebox V10 appliance contains the indicators shown in the following illustration.
Page 14
CHAPTER 1: Hardware Descriptions Alarm Illuminates when certain alarms are triggered. For more information on alarms, see the Firebox Vclass User Guide. Admin Illuminates when a system administrator is connected to the appliance by means of the Vcontroller or the WatchGuard CLI. The back panel of a Firebox V10 appliance contains the interfaces and ports shown in the following illustration.
0 (Private), 1 (Public), 2 (DMZ1), and 3 (DMZ2) act as the primary conduits through which passes all of the network data traffic. Incorporated into each interface are two indicator Firebox V10, V60L, V60, V80, V100 Hardware Guide Front and Back Views Console Interface Ready...
Page 16
CHAPTER 1: Hardware Descriptions lights labeled 10 and 100. These LEDs indicate the speed of traffic being transmitted. High Availability Status LED Indicates the current status of this appliance, if it is one of two connected as a high-availability system. If this is the primary appliance, and the light is on and steady, the system is functional, and this appliance is on-line.
Page 17
Allows you to turn the appliance on or off. UPS Port Permits connection of the appliance to an Uninterruptable Power Supply (UPS). This type of connection enables UPS devices to notify the Firebox V10, V60L, V60, V80, V100 Hardware Guide Front and Back Views "UPS" port...
Power button on the front or the power supply switch on the back of the appliance. The Firebox V100 model The front panel of the Firebox V100 security appliance con- tains the features shown in the following illustration. 1 (Public)
Page 19
WatchGuard Command Line Interface (CLI) to administer and test this appliance. To learn more about this administrative option, see the CLI Guide included on the installer CD. Firebox V10, V60L, V60, V80, V100 Hardware Guide Front and Back Views...
Page 20
Power LED Indicates whether the appliance has been fully turned on and is ready for administration or use. The back panel of a Firebox V100 includes the features shown in the following illustration.l Power supply switch AC power cord Do not connect any Firebox Vclass appliance to a source of power that supplies the wrong voltage.
Firebox V10, V60, V60L, V80, and V100 Components AC Power Cord Enables you to connect the appliance (using the supplied power cord) to a 100 to 240VAC (50/ 60Hz) power source. The power supply can auto- detect 110/220 voltage. Power Supply Switch Allows you to turn the appliance on or off.
Page 22
CHAPTER 1: Hardware Descriptions primary duties: protecting your network and efficiently managing all legitimate data streams. WatchGuard Firebox Vclass Operating System™ (OS) Every Firebox Vclass security appliance is preinstalled with the latest version of the Firebox Vclass Operating System–which is identified on the packaging by a version number.
Firebox Vclass Operating System Fireboxes components of HA interfaces 6, 9 HA status LED 6, 9 Firebox V10, V60L, V60, V80, V100 Hardware Guide LEDs Admin 4, 6, 10 Alarm 4, 7, 10 HA status 6, 9 Power...
Need help?
Do you have a question about the V100 and is the answer not in the manual?
Questions and answers