Common Navigation Commands - Watchguard V10 Command Line Interface Manual

CHAPTER 1: Using the Command Line Interface
At every command level except the top (root) level, entering
the top command and pressing Enter "jumps" the CLI user
from the current level to the top (root) command level. The
top (root) command level does not have this command
available as it isn't necessary. See the following example:
WG(config-qos)#top<ENTER>
WG#_

Common Navigation commands

The following commands can be used at any level of any
CLI mode.
history command
WG#admin<ENTER>
WG(admin)#history
Effect
Arguments
exit command
WG(admin)#exit
Effect
14
Lists the twenty most recently exercised commands
at this level. (When this command is applied at
other levels, it will result in the last twenty
commands entered at that specific level. For more
information on extending or adapting this
command, see "Reviewing the recently used
commands" on page 11.
This command has several adaptations that extend
its usefulness. See "Reviewing the recently used
commands" on page 11 for details.
Exits the current level of CLI and returns to the
next-highest command level, all the way to the top-
level WG# prompt.
WatchGuard Vclass 5.1