Watchguard V10 Command Line Interface Manual page 83

import command (configure certificate level)
WG#config<ENTER>
WG(config)#certificate <ENTER>
WG(config-cert)#import <"certificate
text">
Effect
Arguments
Examples
Results
WatchGuard Command Line Interface Guide
Second level configuration mode commands
-cou US -dns RS1.WatchGuard.com -key \
{rsa 1024 both}<ENTER>
If this command is successful, the CLI will prompt
you to cut and paste the results into the
appropriate means of submitting this request to the
authority.
Assists in the importing of the contents of a newly-
received VPN or Web certificate into the
WatchGuard appliance database.
To import a certificate, you must open the
certificate file and copy the text, then paste it into
the command in the proper location, as shown in
the following example.
None.
WG(config-cert)# import<ENTER>
On-screen instructions appear, as shown here.
Paste certificate below, then press
Enter.
-----BEGIN CERTIFICATE-----
MIIC1jCCAj+gAwIBAgIDBJYLMA0GCSqGSIb3DQE
BBAUAMCgxCzAJBgNVBAYTAlVTMRkwFwYDVQQKEx
BSYXBpZFN0cmVhbSBJbmMuMB4XDTAxMDIxOTA0M
jAyNVoXDTAxMDUyMDA0MjAyNVowOzELMAkGA1UE
BhMCVVMxGTAXBgNVBAoTEFJhcGlkU3RyZWFtQ8D
CCtvvThQ2ug==
-----END CERTIFICATE-----
69