Denial_Of_Service Command - Watchguard V10 Command Line Interface Manual

CHAPTER 3: Configuration Mode Commands
Example

denial_of_service command

WG#config<ENTER>
WG(config)#[no][-icmp [threshold]]
[no][-syn [threshold]]
[no][-udp [threshold]]
[no][-pingofdeath]
[no][-sourceroute]
[no][-server_ddos [threshold]]
[no][-client_ddos [threshold]]
Effect
Arguments
46
WG(config)#delete address
exec_addresses<ENTER>
# This command deletes an address group named
"exec_addresses".
WG(config)#delete ike policy "HQ
IKE"<ENTER>
# This command deletes an IKE policy named "HQ
IKE".
#threshold packet/s;default=1000
#threshold packet/s;default=5000
#threshold packet/s;default=1000
#threshold connection/s;default=100
#threshold connection/s;default=100
Records your preferences for denial-of-service
defense parameters. You can enter any or all of the
customizable arguments listed below.
[no][-icmp <threshold>]
Activates ICMP flood protection with a user-noted
threshold noted as packets per second;
default = 1000.
[no][-syn <threshold>]
Activates TCP/SYN flood protection with a user-
noted threshold; default=5000.
[no][-udp <threshold>]
Activates UDP flood protection with a user-noted
threshold; default=1000.
WatchGuard Vclass 5.1