High_Availability Commands - Watchguard V10 Command Line Interface Manual

Example

high_availability commands

High Availability commands will not be available to you if
the WatchGuard appliance you are administering does not
feature any HA ports. In addition, you need a High
Availability feature license.
Enter high availability configuration mode
WG#config<ENTER>
WG(config)# high_availability
WatchGuard Command Line Interface Guide
Top-level configuration mode commands
[no][-pingofdeath]
Activates ping-of-death protection.
[no][-sourceroute]
Activates source route protection by disallowing
source route options.
[no][-server_ddos <threshold>]
Activates server DDOS protection; the default
threshold = 100, which controls the maximum
number of connections permitted to any one
server.
[no][-client_ddos <threshold>]
Activates client DDOS protection; the default
threshold=100, which controls the maximum
number of connection requests permitted to a
single client.
no
Enter this before any options you want to
deactivate in this appliance, as shown above.
WG(config)#denial -syn 1000 no -
udp<ENTER>
N
OTE
47