Configuration Checklist - Watchguard QMS 1200 Quick Start Manual

Registration and Configuration
1
Register with LiveSecurity® Service
• Find the serial number on your device and record it.
• Go to http://www.watchguard.com/activate
• Log in.
NOTE: If you are new to WatchGuard®, follow the instructions provided at the URL above to create a profile.
• Follow the instructions on the screen to enter your serial number and receive a feature
key.
NOTE: If you will not have an Internet connection during the setup procedure, we recommend that you copy
your feature key to a text file during the activation process.
2

Configuration Checklist

• To configure your WatchGuard device, you must collect the following information
about your network:
Hostname
Domain Name
IP Address
Subnet Mask
Gateway Address
Name Server Address
Default User ID
Default Password
Organization Name
Server Admin Email
Serial Number
Example Settings
hostname
example.com
10.0.0.1
255.255.255.0
10.0.0.2
10.0.0.2
admin
admin
example.com
admin@example.com
B0F512345-1234
Your Settings