Watchguard V10 Command Line Interface Manual page 135

# valid user domain tenant -id must be from 5001 to
65535
# -idle_time_out m
minutes
# -radius_timeout sec Time out for radius request
# -radius_retry n
Effect
Arguments
WatchGuard Command Line Interface Guide
Second level configuration mode commands
Idle timeout.
number of retries for radius query
Records a new VLAN-specific tenant entry, along
with the appliance interface that VLAN tenant
traffic will be expected to use.
user_domain
This argument identifies which type of tenant this
entry represents.
<"name">
This argument records the name assigned to this
VLAN tenant (for use in security policies.)
<-id num>
This is "id" followed by the number (above 5000)
assigned to this tenant.
-public <default|<a.b.c.d/e>
This allows you to specify a public user domain IP
address and gateway.
<-idle_timeout m>
This argument sets the idle timeout for this entry in
minutes.
<-radius_ip a.b.c.d>
This argument indicates the radius server and its IP
address.
[-radius_port port]
This optional argument notes the port number of
m is the number in
121