Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
•
The number of packets to be transmitted out the port, that incurred
transmission hardware errors. [
•
The number of packets to be transmitted out the port, but were not
transmitted due to congestion detected by the IOM combined with
congestion detected by the PPE. [
•
The number of packets that were discarded due to receive abort errors.
[
sfddiRxHwAbort
The following Port Error Statistics are available for the 3F00-01 only:
•
The number of DPC errors. [
•
The number of RBC errors. [
4.2.3 3F00-01/3F55-01 Port SMT Status
Station management (SMT) refers to the entity within a station on an
FDDI ring that monitors and controls station activity. Version 2.4 of the
ATX system software supports SMT version 7.3. Versions of ATX system
software prior to 2.4 support SMT version 6.2. In the sections that follow,
the SMT version 6.2 MIB variables are presented first, followed by the
SMT version 7.3 versions.
4.2.3.1 SMT Version 6.2
•
Version of SMT that this port is using. [
•
The highest version of SMT that is supported by this port.
[
snmpFddiSMTHiVersionId
•
The lowest version of SMT that is supported by this port.
[
snmpFddiSMTLoVersionId
•
The number of MACs connected to this port. This is always 1.
[
snmpFddiSMTMACCt
•
The number of PHYs connected to this port. This is always 2.
[
snmpFddiSMTNonMasterCt
Page 4-8
]
sfddiDpcErrCnt
sfddiRbcErrCnt
]
]
]
]
FDDI Dual-Attached Intelligent Module User's Guide
]
ifOutErrors
ifOutDiscards
]
]
snmpFddiSMTOpVersionId
]
]