Configuring The 3F00-01 And 3F55-01; Configuration - Cabletron Systems 3F00-01 User Manual

CONFIGURING THE 3F00-01 AND 3F55-01

You can configure your 3F00-01 and 3F55-01 using the following tools:
• Local Console Manager (LCM), an application that allows you to
monitor, manage, and configure your ATX through an out-of-band
RS-232 connection.
• Remote Console Manager, a remote standalone configuration
application
• EliteView/UX, an SNMP-based network management system
• EliteView/OV, an SNMP-based network management software
module for HP's OpenView
• EliteView/NV, an SNMP-based network management software
module for IBM's NetView/6000 network management systems
• Any SNMP-based network management system
For more details about LCM, see your ATX User Guide. For details about
the other network management software, refer to the product's
documentation.

3.1 CONFIGURATION

Refer to the ATX User Guide for the LCM configuration commands
common to all I/O modules. Configuration information particular to the
3F00-01 and 3F55-01 is described below. Version 2.4 of the ATX system
software supports SMT version 7.3. Versions of ATX system software
prior to 2.4 support SMT version 6.2.
FDDI Dual-Attached Intelligent Module User's Guide
CHAPTER 3
Page 3-1