Chapter 2: Connecting to the Network
4. Attach the MIC B plug on the other end of the first cable to the MIC B
receptacle on the first DAS.
5. Attach the MIC B plug on the end of the second cable assembly to the
MIC B receptacle on the OBS (Figure 2-9).
6. Attach the MIC A plug on the other end of the second cable to the MIC
A receptacle on the second DAS.
7. Check the LEDs. In this configuration the RING A RX, TX and THRU
LEDs will be on.
Page 2-14
FDDI Dual-Attached Intelligent Module User's Guide