Table of Contents
Advertisement
Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
•
The attachment configuration for the station or concentrator.
[
fddimibSMTCFState
•
Whether the port has been intentionally disconnected.
[
fddimibSMTRemoteDisconnectFlag
•
The current status of the primary and secondary paths within this
station. [
fddimibSMTStationStatus
•
This variable assumes the value of the
[
fddimibSMTPeerWrapFlag
•
This variable assumes the value of the
millisecond. [
•
This variable assumes the value of
milliseconds. [
•
An SMT action to be performed. [
4.2.4 3F00-01/3F55-01 Port MAC Status
Media Access Control (MAC) is the data link layer sublayer responsible
for scheduling, transmitting, and receiving data on a shared medium local
area network. Versions of system software prior to 2.4 support SMT
version 6.2. In the sections that follow, the SMT version 6.2 MIB
variables are presented first, followed by the SMT version 7.3 versions.
4.2.4.1 SMT Version 6.2
•
Detailed status of the last DPC error. [
•
Detailed status of the last RBC error. [
•
Whether any packets were received with 16 bit MAC addresses.
[
sfddiShortAddressing
•
Indicates the station's bridge/end-station capabilities. This is always
FSC-Type0 (1)
•
Of this MAC's paths, the greatest lower bound of
Every MAC has just one path, so this is simply the lower bound of
, which is always -32. [
T_MAX
FDDI Dual-Attached Intelligent Module User's Guide
]
]
fddimibSMTTimeStamp
fddimibSMTTransitionTimeStamp
]
. [
snmpFddiMACFrameStatusCapabilities
snmpFddiMACTMaxGreatestLowerBound
]
]
PeerWrapFlag
, in the unit of
TimeStamp
]
TransitionTimeStamp
]
fddimibSMTStationAction
sfddiDpcErrValue
sfddiRbcErrValue
in CFM.
, in the unit of
]
]
]
]
supported.
T_Max
Page 4-11
]
Advertisement
Table of Contents
Troubleshooting
