Cabletron Systems 3F00-01 User Manual page 49

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
• A count of the number of frames received by this MAC.
[
fddimibMACFrameCts
• A count that should, as closely as possible, match the number of
frames addressed to (A bit set) and successfully copied into the
station's receive buffers (C bit set) by this MAC.
[
fddimibMACCopiedCts
• A count that should, as closely as possible, match the number of
frames transmitted by this MAC. [
• A count of the number of frames that were detected in error by this
MAC that had not been detected in error by another MAC.
[
fddimibMACErrorCts
• A count of the number of instances that this MAC detected a format
error during frame reception such that the frame was stripped.
[
fddimibMACLostCts
• A threshold (0..65536) for determining when a MAC Condition report
shall be generated. [
• The actual frame error ratio (corresponds to ANSI {fddiMAC 96}).
[
fddimibMACFrameErrorRatio
• Indicates the current state of the RMT State Machine.
[
fddimibMACRMTState
• The RMT flag Duplicate Address Flag,
• A flag set when the upstream neighbor reports a duplicate address
condition. [
• Indicates the MAC Frame Error Condition is present when set.
[
fddimibMACFrameErrorFlag
• This variable shall take on the value of the
RMT. [
fddimibMACMAUnitdataAvailable
• This variable indicates the presence of underlying hardware support
for this MAC object. [
• The variable determines the value of the
RMT. [
fddimibMACMAUnitdataEnable
FDDI Dual-Attached Intelligent Module User's Guide
]
]
]
]
fddimibMACFrameErrorThreshold
]
fddimibMACUnaDaFlag
fddimibMACHardwarePresent
fddimibMACTransmitCts
]
DA_Flag
]
]
MAC_Avail
]
MA_UNITDATA_Enable
]
]
]
. [
fddimibMACDaFlag
flag defined in
]
flag in
Page 4-15
]