Cabletron Systems 3F00-01 User Manual page 34

Chapter 3: Configuring the 3F00-01 and 3F55-01
•
fddimibMACLostCts
MAC detected a format error during frame reception such that the
frame was stripped (corresponds to ANSI {fddiMAC 82}, refer to
ANSI MAC 7.5.3). Any attempt to write this parameter will cause the
MAC's
Frame_Ct
be zeroed.
Some of the SMT version 7.3 MIB variables (
their access types restricted from Read-Write to Read-Only. The variables
with restricted access include:
•
fddimibSMTConfigPolicy
policies currently desired in a node (corresponds to ANSI {fddiSMT
26}). This is always 0.
•
fddimibMACRequestedPaths
the path(s) into which the MAC may be inserted (corresponds to ANSI
{fddiMAC 32}, refer to ANSI SMT 9.7). Only default setting as
defined in SMT 9.7 is supported.
•
fddimibPORTConnectionPolicies
connection policies desired in the node (corresponds to 'none', the
second octet to 'tree', and the third octet to 'peer'.
Variables in the SMC enterprise MIB can be set to specify under what
conditions traps should be sent to an NMS. (Refer to the ATX MIB
Reference Guide for more detailed information.) Those variables include:
•
sfddiSmtConditions
the NMS via SNMP traps.
•
sfddiSrfConditions
the NMS via SNMP traps.
In the SMC enterprise MIB, you can set a variable to connect to port B:
•
sfddiThruB
for single-attached stations).
Page 3-4
– A count of the number of instances that this
,
Copied_Ct
– A value that indicates the configuration
– SMT conditions which should be reported to
– SRF conditions which should be reported for
– Whether to connect to the FDDI port B (not applicable
FDDI Dual-Attached Intelligent Module User's Guide
, ,
Transmit_Ct Error_Ct
fddimibSMT 2
– List of permitted paths which specifies
– A value representing the port's
, and to
Lost_Ct
) have had