Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
•
The
LEM_Reject_Ct
[
snmpFddiPORTLemRejectCt
•
The value of the PHY's
•
The value of the PHY's
•
The PHY's current connection state. [
•
The current state of the PHY's PCM state machine.
[
snmpFddiPORTPCMState
•
The value of the PHY's
[
snmpFddiPORTPCWithhold
4.2.5.2 SMT Version 7.3
•
The total number of PHYs possible (across all FDDI ports) on this
unit. [
fddimibPORTNumber
•
The value of the PORT's
•
The type of the remote PORT as determined in PCM.
[
fddimibPORTNeighborType
•
A value representing the PORT's connection policies desired in the
node. [
fddimibPORTConnectionPolicies
•
The indications (
to place a MAC in the output token path to a PORT.
[
fddimibPORTIndicated
•
Indicates the Path(s) into which this PORT is currently inserted.
[
fddimibPORTCurrentPath
•
This variable is a list of permitted Paths where each list element
defines the PORT's permitted Paths. [
•
Indicates the MAC, if any, whose transmit path exits the station via this
PORT. [
fddimibPORTMACPlacement
•
Indicates the Paths which are available to this PORT.
[
fddimibPORTAvailablePaths
•
This variable indicates the type of PMD entity associated with this
PORT. [
fddimibPORTPMDClass
FDDI Dual-Attached Intelligent Module User's Guide
of the associated PHY.
]
LER_Cutoff
LER_Alarm
]
PC_Withhold
]
]
PC_Type
]
,
T_Val (9)
R_Val (9)
]
]
]
]
. [
snmpFddiPORTLerCutoff
. [
snmpFddiPORTLerAlarm
snmpFddiPORTConnectState
. This is always none (1).
. [
fddimibPORTMyType
]
in PC-Signalling, of the intent
fddimibPORTRequestedPaths
]
]
]
]
]
]
Page 4-17