3F00-01/3F55-01 Path Group - Cabletron Systems 3F00-01 User Manual

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
• A value that indicates the connection capabilities of the PORT.
[
fddimibPORTConnectionCapabilities
• This variable assumes the value of the
• The count of the consecutive times the Link Confidence Test (LCT)
has failed during connection management. [
• A long term average link error rate. [
• A link error monitoring count of the times that a link has been rejected.
[
fddimibPORTLemRejectCts
• The aggregate link error monitor error count, set to zero only on station
initialization. [
• The link error rate estimate at which a link connection will be broken.
[
fddimibPORTLerCutoff
• The link error rate estimate at which a link connection will generate an
alarm. [
fddimibPORTLerAlarm
• An indication of the connect state of this PORT which is equal to the
value of
Connect_State
• The state of this PORT's PCM state machine. [
• The value of
• The condition becomes active when the value of
is less than or equal to
• This variable indicates the presence of underlying hardware support
for this PORT object. [
• A PORT action to be performed. [

4.2.6 3F00-01/3F55-01 PATH Group

This group applies to SMT version 7.3 only.
• The total number of PATHs possible (across all FDDI ports) on this
unit. [
fddimibPATHNumber
• Specifies the minimum time value of
used by the MAC that is configured in this PATH.
[
fddimibPATHTVXLowerBound
Page 4-18
]
fddimibPORTLemCts
]
. [
fddimibPORTConnectState
. [
PC_Withhold fddimibPORTPCWithhold
fddiPORTLerAlarm
fddimibPORTHardwarePresent
]
]
FDDI Dual-Attached Intelligent Module User's Guide
]
BS_Flag
fddimibPORTLCTFailCts
fddimibPORTLerEstimate
]
]
. [
fddimibPORTLerFlag
fddimibPORTAction
fddiMACTvxValue
. [
fddimibPORTBSFlag
]
]
fddimibPORTPCMState
]
fddiPORTLerEstimate
]
]
that shall be
]
]
]
]