Displaying The Module Status - Cabletron Systems 3F00-01 User Manual

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01

4.1 DISPLAYING THE MODULE STATUS

To display the status of the 3F00-01 and 3F55-01, at the LCM prompt
type:
ATX >status
Current Number of Learned Addresses: 34
Number of Defined Filters: 2
ModuleType
1 PPE
2 FDDI–IOM
3 CSMA–IOM
4 HSSI–IOM
5 IFDDI–IOM
6 TR–IOM
Displaying the 3F00-01 Port Status
To display the status of a 3F00-01 or 3F55-01 port using LCM, at the
LCM prompt type:
ATX > status <port number>
The port number is determined by counting from the first port on the
top-most module in the ATX, which is the Packet Processing Engine
(PPE).
The status of a 3F00-01 or 3F55-01 port includes:
• Type – There are six possible values for the module type, two for the
3F00-01 and four for the 3F55-01. The types are listed below:
- FDDI DAS
- FDDI DAS Single Mode
- Intelligent FDDI DAS
- Intelligent DAS Single Mode
- Intelligent DAS Single Mode on MIC A
- Intelligent DAS Single Mode on MIC B
• Bridging – which functions have been enabled for bridging (see the
command).
bridge
• Routing – which functions have been enabled for bridging (see the
or
iproute ipxroute
Page 4-2
DiagStatus
Passed
Passed
Passed
Passed
Passed
Passed
commands).
FDDI Dual-Attached Intelligent Module User's Guide
InUse TempOk
True Normal
True Normal
True Normal
True Normal
True Normal
True Normal
Ports
1
2
3
4
5
6