Smt Version 7.3 - Cabletron Systems 3F00-01 User Manual

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01
• The path(s) desired for this MAC. This is always the Primary (1) path.
[
snmpFddiMACPathsRequested
• The
PC_Type
value of 5 when
[
snmpFddiMACDownstreamPORTType
• The MAC's value for
• The value determined by this MAC. [
T_Neg
• The MAC's value for
-2,097,120. [
• The MAC's value for
• The MAC's value for
• The current usage of the station's bridge/end-station capabilities. This
is always
FSC-Type0 (1)
• The MAC's
• The MAC's
• The MAC's
• The current state of the MAC's RMT state machine.
[
snmpFddiMACRMTState
• The current value of the MAC's RMT
• Whether a MAC Frame Error condition is present. This is always False
(2), since the ANSI standard does not specify what this is.
[
snmpFddiMACFrameMACCondition

4.2.4.2 SMT Version 7.3

• Whether any packets were received with 16 bit MAC addresses.
[
sfddiShortAddressing
• The number of FDDI ports configured in Configuration EEPROM.
[
fddimibMACNumber
• Indicates the MAC's optional Frame Status processing functions.
[
fddimibMACFrameStatusFunctions
FDDI Dual-Attached Intelligent Module User's Guide
of the MAC's downstream neighbor. The ATX uses a
is not known.
PC_Type
. [
T_Req
. Possible values range from -32 to
T_Max
snmpFddiMACTMax
. [
Tvx snmpFddiMACTvxValue
. This is always -32. [
T_Min
. [
snmpFddiMACCurrentFrameStatus
. [
Frame_Ct snmpFddiMACFrameCt
. [
Error_Ct snmpFddiMACLostCt
. [
Lost_Ct snmpFddiMACLostCt
]
]
]
]
]
snmpFddiMACTReq
snmpFddiMACTNeg
]
]
]
]
DA_Flag
]
]
]
]
]
snmpFddiMACTMin
]
. [
snmpFddiMACDAFlag
Page 4-13
]
]