Before using the machine
Note
The image will be printed on the surface of the paper facing down when the paper is loaded into the
tray 1.
!
Detail
For details on the paper sizes, refer to "Paper" on page 1-18.
1.4.2
Loading paper into tray 2/3/4/5
The paper loading method is the same for trays 2, 3, 4 and 5.
The following describes the paper loading procedure for tray 2.
0
Tray 4/5 is an option.
1
Pull out tray 2.
2
Slide the lateral guides to fit the size of paper to be
loaded.
–
If the lateral guides are not positioned correctly for the
loaded paper, the paper size will not be correctly
detected. Be sure to adjust the lateral guides to the
size of the loaded paper.
3
Load the paper into the tray so that the side of the paper
to be printed on (the side facing up when the package
was unwrapped) faces up.
8650
Film
Lateral guides
, mark
1
1-25