Specifying General Settings For Tcp/Ip-Based Communication - Konica Minolta magicolor 8650DN User Manual

Network settings
2 Network settings
2.1

Specifying general settings for TCP/IP-based communication

Specify settings to use this machine in a TCP/IP network environment. To use this machine by connecting to
the network, specify these settings in advance.
Reminder
In order to apply all changes to the network settings, turn off this machine, then on again.
When turning off the power switch and turning it on again, wait for 10 seconds or longer after power-
off, and then turn on the power again. The machine may not operate correctly if it is turned on
immediately after being turned off.
TCP/IP Settings
On the "Utility" menu of the control panel, select "System Settings" - "Network Settings" - "TCP/IP".
Specify the following settings.
Note
For details on the "Utility" menu operations, refer to "Control panel" on page 8-2.
Item
TCP/IP Settings
IP Setting / Application
Method
IP Address
Subnet Mask
Default Gateway
Dynamic DNS Settings
DNS Host Name
DNS Domain Name Auto
Retrieval
8650
Definition
Select [ON].
Select whether the IP address is automatically acquired or
directly specified.
To directly specify the IP address, specify the IP address of
this machine.
To directly specify the IP address, specify the subnet mask
of the network to be connected.
To directly specify the IP address, specify the default gate-
way of the network to be connected.
To automatically register the host name specified with [Host
Name] for the DNS server that supports the Dynamic DNS
function, select [ON].
Specify the host name of this machine (up to 63 characters).
Select whether to automatically acquire the name of the DNS
domain.
This item is enabled when the DHCP is enabled.
2
Prior confirmation
IP application method to
be used
IP address of this ma-
chine
Subnet mask of this ma-
chine
Default gateway of this
machine
Whether Dynamic DNS is
used
Whether automatic ac-
quisition is available with
DHCP
2-2