Network settings
2.4
Specifying network print settings
2.4.1
Specifying LPR/Port9100 print settings
Specify settings for printing by using LPR or Port9100.
LPR printing is performed via the network using the LPR protocol. LPR printing is used in the UNIX-like OS.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a printer of the print destination.
Specify the settings according to the following flowchart.
LPD Setting
!
Detail
To print data using LPR or Port9100, settings for the printer driver must be specified after these
settings. For details, refer to the "Installing the printer driver for Windows" on page 3-2.
TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 2-2.
LPD Setting
In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".
Specify the following setting.
Item
LPD
RAW Port Number
In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".
Specify the following setting.
Item
RAW Port Number
8650
➀
Definition
Select "Enable".
Definition
Select the check box for the port to be used, and then spec-
ify the RAW port number.
TCP/IP Settings
➀ LPR printing
➁ Port9100 printing
Finish
2
➁
RAW Port Number
Prior confirmation
Prior confirmation
2-7