Konica Minolta magicolor 8650DN User Manual page 145

Installing the printer driver for Macintosh
4
Click the AppleTalk tab, and then select the "Make AppleTalk Active" check box.
5
Click the close button at the upper left corner of the dialog box.
– When the "Apply configuration changes?" message appears, click the [Apply] button.
Adding a printer
1
In the "Apple" menu, select "System Preferences".
2
Click the [Print & Fax] icon.
3
Click [+] on the "Print & Fax" window.
4
Click [Default].
Connected printers are detected.
– If no printer is detected, turn your printer off then on again.
In this case, turn off the printer, and then wait approximately 10 seconds before turning it on again.
If you turn the printer on immediately after turning it off, it may not function correctly.
5
From the "Printer Name" list, select the desired AppleTalk-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
– After the printer driver is selected, go to Step 7.
– If an incorrect printer driver is selected, go to Step 6.
6
Select the desired printer driver manually.
– When OS X 10.5 is used, select the "Select a driver to use" from the "Print Using", and then select
the printer driver of the desired model name from the list.
– When OS X 10.4 is used, select "KONICA MINOLTA" from the "Print Using", and then select the
printer driver of the desired model name from the list.
7
Click [Add].
When the selected printer is registered in the "Print & Fax", the setting procedure is completed.
– If the "Installable Options" window appears, proceed to change the option settings as necessary.
For details, refer to "Default settings for the OS X printer driver" on page 6-3.
8650
4
4-6