Konica Minolta magicolor 8650DN User Manual page 35

Before using the machine
No. Part name
3 Authentication unit (IC card
type) AU-201
4 Mount kit MK-711
5 Mount kit MK-713
6 Desk DK-505
7 Paper feed cabinet PC-106
8 Paper feed cabinet PC-205
9 Paper feed cabinet PC-406
10 Finisher FS-519
11 Output tray OT-602
12 Punch kit PK-515
13 Mailbin kit MT-502
14 Saddle stitcher SD-505
15 Finisher FS-609
16 Punch kit PK-501
17 Local interface kit EK-603
18 Security kit SC-503
19 Hard disk drive HD-508
*1
Parts marked with an asterisk are to be installed to the mount kit, and therefore are not shown in the
illustration.
*2
Parts marked with an asterisk are internal options and therefore are not shown in the illustration.
Reminder
To keep the features and quality of the machine, use the desk or paper feed cabinet to place the
machine on the floor.
8650
Description
Performs user authentication by reading the information registered on IC
cards.
To use the authentication unit (IC card type), an optional hard disk drive HD-
508 and local interface kit EK-603 must be installed.
Used for installing, local interface kit EK-603.
Used for banner printing.
Allows this machine to be set up on the floor.
Referred to as the "desk" throughout the manual.
The top tray can be loaded with up to 500 sheets of paper, and the bottom tray
can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.
Both the top and bottom trays can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
Can be loaded with up to 2,500 sheets of paper.
Referred to as the "tray 4 (LCT)" throughout the manual.
Feeds out finished printed pages. The "Collate" setting (separating by copy
set), "Offset" setting (separating by pages), Staple settings ("Corner" and "2
position"), Center Staple setting, and Half-Fold setting are available.
Installed onto finisher FS-519 to divide printed pages.
Referred to as the "output tray" throughout the manual.
Installed onto finisher FS-519 to allow hole punching to be used.
Installed onto finisher FS-519 to divide printed pages (only with computer
printing) and feed them into the appropriate tray assigned to a specific individ-
ual or group. Collects printed pages.
Referred to as the "mailbin kit" throughout the manual.
Installed onto finisher FS-519 so that prints can be bound or folded at the cen-
ter.
Referred to as the "saddle stitcher" throughout the manual.
Feeds out finished printed pages. The "Collate" setting (separating by copy
set), "Offset" setting (separating by pages), and Staple settings ("Corner" and
"2 position") are available.
• In order to install the finisher, the main unit must be installed on the desk,
on the tray 4 (LCT), on the single paper feed cabinet, or on the double pa-
per feed cabinet.
Installed onto finisher FS-609 to allow hole punching to be used.
*1
Used for connecting the authentication unit (biometric type) and the authenti-
cation unit (IC card type).
*2
Installed to encode the data saved on the hard disk so that the hard disk can
be used more safely.
*2
Must be installed when using Security Print, Save in User Box, Font Download-
ing, Color Profile, Direct Print (including Encrypted PDF User Box), or
PageScope Direct Print (Utility).
Areas available to users are as follows.
- Secure Print/Save in User Box: 31GB
- Font Downloading/Color Profile/Direct Print (including Encrypted PDF User
Box)/PageScope Direct Print (Utility): 3GB
If the message "Memory overflow" frequently appears while you are printing
using the Sort or Banner Printing functions, a hard disk will need to be in-
stalled.
Referred to as the "HDD" throughout the manual.
1
1-3