4.1
Loading Paper
4
Basic Operations
4.1
Loading Paper
Loading paper into the main body tray
The same paper loading procedure is used for Tray 1 and Tray 2. This section describes how to load paper into Tray 1.
A
Pull out the tray to load paper into.
NOTICE
Be sure to pull out the tray fully until a blue label shows on the rear-
left side of the tray. Otherwise, the feed roller may not open or
another machine trouble may occur.
B
Open the feed roller.
C
Turn two side guide lock knobs (in the front and
rear sides) counterclockwise to loosen them.
D
While pressing the side guide lock release lever
(
), slide it to any position (
-
Slide both the front and rear side guide plates.
-
Determine their locations based on the size indicator of
the bottom plate of the tray.
4-1
).