Consumables; System Settings - Konica Minolta magicolor 8650DN User Manual

Settings for control panel

Consumables

Menu
Imaging Unit C
Imaging Unit M
Imaging Unit Y
Imaging Unit K
Fusing Unit
TransferBelt Unit

System Settings

Menu
Language Setting
PowerSave Set-
ting
PaperTray Setting
Output Settings
8650
Description
Displays the status of use.
Description
Select the language of the panel message.
Low Power Setting Specify the desired length of time (between 2 and 240 min-
utes) until the machine enters Power Save mode.
SleepMode Setting Select whether to enable the Sleep setting.
EnteringSleepMode Specify the desired length of time (between 2 and 240 min-
utes) until the machine enters Sleep mode.
EnteringPowerSave As conditions for moving to the Power Save mode, select
"Normal" or "Immediately".
Normal: After printing has finished, the machine enters Pow-
er Save mode (Low Power mode or Sleep mode) according
to the normal power save setting (specified time to enter
Sleep mode in Low Power Mode Settings).
Immediately: After printing has finished, the machine imme-
diately reverts to the state it was in just before printing be-
gan.
AutoTraySelection Specify the paper trays that are selected when the Auto Tray
Switch feature is performed.
Tray Priority Specify the priority for selecting the paper trays when the
Auto Tray Switch feature is performed.
AutoTray Switch Select whether or not a paper tray loaded with paper of the
same size is selected automatically when the paper tray be-
comes empty.
No Matching Paper Select the operation that is performed when there is no pa-
per of the corresponding size in the specified paper tray.
• Stop Printing: The machine stops operating. (Stop Print-
ing)
• Switch Trays: The specified paper trays are selected in
the specified order of priority and, when the tray runs out
of paper, the next paper tray is selected. (Switch Trays)
Print Output Select whether the machine waits until the first page of a
print job is received before starting to print or whether the
machine waits until all data is received before starting to
print.
Blank Page Print Select whether or not to print a blank page if it is included.
Output Tray Specify the priority for using the output trays of the finisher.
Shift Each Job Select whether or not to use offset for each job.
Bin Assignment The output tray 1 of the finisher FS-519 can be specified as
mailbin 5, and the output tray 2 can be specified as mailbin
6.
When an additional output tray is installed, the output tray 1
of the finisher FS-519 can be specified as mailbin 5 and the
additional output tray can be specified as mailbin 6.
8
Default
Setting
English
15 min-
utes
ON
20 min-
utes
Imme-
diately
T2, T3,
T4, T5
T2, T3,
T4, T5
OFF
Stop
Printing
Page
Print
Do Not
Print
Finisher
Tray1
ON
Don't
Set
8-18